Mini-Clik II Rain Sensor

Mini-Clik II enhances any irrigation project by increasing the efficiency of the automatic sprinkler system. Simple click-stop setting accurately measure rainfall in quantities of 1/8 inch to one inch and shut off the system when turf has received the rainfall it needs. Its patented maitenance-free design uses hygroscopic disks that absorb water and dry out the way turf does. Engineered to last, Mini-Clik has a strong aluminum bracket, advanced-thermoplastic housing, and weatherproof switch mechanism, and is guaranteed for five years. Mini-Clik is easy to wire and compatible with most time/controllers, and with its low, competitive price, will typically pay for
itself in one growing season. The Mini-Clik II has set the standard for reliable
rain sensing sice 1984.

Specifications:

Weight (without wire): 2.7 ounces
Bracket extends 6 inches
Switch Rating: U.L. Listed- 10.1 amps, 1/4 H.P. @ 125/250 VAC
Wiring: Typically interrupts the circuit to solenoid valves by wiring between common ground wire and common terminal on controller
Adjustment Ranges: Rainfall shutoff at 1/8", 1/4", 1/2", 3/4", or 1", +1/16". Ventilation adjustment for reset rate.
Plastic parts made of Valox&ref;, a U.V. stabilized engineering plastic
Included with unit: 25 ft. #20 two-conductor wire and a lead wire for "normally open" wiring, 2 mounting screws

Model #502

ISI Home Commercial Division Agricultural Division Contact Us